Lookin' like the Bennett M120 with EIC control

[bgreene]

Now the tabs are installed, pump mounted, and the tubes connected.
Next the switch and wiring, then done. Slow installation.......like turtle

[reelapeelin]

Originally Posted by bgreene

Now the tabs are installed, pump mounted, and the tubes connected.
Next the switch and wiring, then done. Slow installation.......like turtle

Nope...sorry...after switch and wiring comes filling w/fluid and priming the system up...then done...

[bgreene]

Originally Posted by reelapeelin

Nope...sorry...after switch and wiring comes filling w/fluid and priming the system up...then done...

Yeh, yeh, I'm getting there.........

[Airslot]

I had M120's on my V, probably the best mod you can do. Congrats.

[bgreene]

Originally Posted by Airslot

I had M120's on my V, probably the best mod you can do. Congrats.

Airslot - You have a PM from me.

[bgreene]

Originally Posted by reelapeelin

Nope...sorry...after switch and wiring comes filling w/fluid and priming the system up...then done...

1. Tabs: All checks out so I've moved on to the rest of my projects.
2. GPS: New power cord for the standard horizon GPS / Plotter fixed that problem.
3. Digital antenna: installed
4. Gunnel rod holders - port and starboard - fixed where the plastic had cracked at the corner.
5. Replaced raw water wash down fitting
More to follow.........

[macojoe]

It was a pain to get my tabs bled! they ended up bleeding out by use so make sure you keep eye on the tank for a bit to keep filling up when low, after they are set i have not used a drop of fluid in 3 years!

[bgreene]

Originally Posted by macojoe

It was a pain to get my tabs bled! they ended up bleeding out by use so make sure you keep eye on the tank for a bit to keep filling up when low, after they are set i have not used a drop of fluid in 3 years!

Good tip, thanks

[Bygracealone]

Good post BGreene. Congrats on the tabs.

I'm about to buy and install M120's on my Hydra. For me, it's a pricey modification, but I've heard so many good things about them, I feel compelled to go for it.

Any pics of your install?

[bgreene]

Originally Posted by Bygracealone

Good post BGreene. Congrats on the tabs.

I'm about to buy and install M120's on my Hydra. For me, it's a pricey modification, but I've heard so many good things about them, I feel compelled to go for it.

Any pics of your install?

I can take a few pics - I'm not quick at these sort of installations and I took my time doing it...... to try to do it right the 1st time. Now I can say it's quite straight forward, nothing particularly tricky. Follow the written directions and also refer the installation video Bennett Tabs has on the internet. Finally - there's a guy named Tom from Bennett that lurks the Hull Truth web site, extremely helpful.