|
|
#1
|
|||
|
|||
motor question
can i use a 292 straight six out of a old chevy truck as long as i change the freeze plugs and use marine gaskets and dirtibutor and can i still use the same out drive
__________________
77 v20 cuddy cabin chevy straightsix 
|
|
#2
12-20-2011, 10:53 AM
|
||||
|
||||
what was in it before?? most ran chevy 250,i used a chevy 350 out drive but had to have it rebuilt with the right gear ratio
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#3
12-20-2011, 05:25 PM
|
||||
|
||||
|
The 292 is taller than the 250, you will need a longer exhaust bellows from the elbow to teh exhaust pipe. Way back when, I wanted to swap in a 292 and use a four barrel Q-J on it(the factory intake will accept it if you pull the adapter plate off). cam shaft might be a bit different, but first of all, make sure the motor is worth messing with, they haven't made them in quite a while
|
|
#4
12-20-2011, 05:50 PM
|
||||
|
||||
|
mercruiser actually put out a few... I think they were around 200 hp
I had a 292 that I put in a suburban.... GOBS of torque.... Make sure that either it will accept the front motor mount from the 165 or that you can use side mounts in your hull.
|
|
#7
12-20-2011, 09:28 PM
|
||||
|
||||
|
Mercruiser offered the 292 as a 200 hp TR drive set up, big heavy bastard
|
|
#8
12-23-2011, 08:46 PM
|
|||
|
|||
|
ok so its doable is what im seing and even a 5.7 or 5.0 is doable engine tag says motor and drive no more than 950 lbls together im gonna get it weighed out both ways but probably go 305 or 5.0 whatever you wanna call it
__________________
77 v20 cuddy cabin chevy straightsix
|
 |
|
|
Linear Mode
