2 questions

[reelapeelin]

Originally Posted by Zarkohl

1)

2) I recently tried a 9.9 kicker on my v20. but when I went to the stern to start it (non-electric kicker) water came in the floor drain. I read in a post that water coming in the boat like that can be corrected w/check-valves between the floor and hull. I can't, however, seem to find a find info or pics of these "check valves". Could someone please give me some addnl info of these. Thanks, Jim

Here's a picture of where I'm talking about installing check valves...and the link below is to the style of check valve I intended...



CHECK VALVES:

http://www.westmarine.com/webapp/wcs...classNum=50649

The valves shown in Smoke's post above are considered "scupper" valves...the link here is the one I was talking about...it is installed internally in the hose that connects the outter thru hull fitting to the inside thru DECK (drain)fitting...as the outter thru hull fitting goes out the side of the boat, I don't think a "scupper" fitting would be a good idea...although they would be fine to run out the transom of the boat...