Looking at the pics from the beginning of this post, it's not hard to imagine how bad the transom was from the metal plate that was bolted to it. Mine had a 2x8 cut to fit the inside of the splashwell... I'm closer to getting all the wood out and want to ask again about the "voids" I may find. I would guess that these voids would allow water to get to the stringers and such if the transom was bad enough. While everything seems solid in the bilge and all other areas I've checked, is there anything more I need to do before "The Pour"?
|
07-18-2011, 02:29 PM
Threaded Mode