|
|
#16
02-19-2011, 11:05 AM
|
||||
|
||||
Just a hint, if you are going to replace the 1.5" fill hose, attach your new hose to the old one using a piece of 1.5" OD pipe and SCREW the two pieces of hose to the pipe. Dont use clamps you probably wont get clamps through there. Then when you pull your old hose out it pulls your new hose through. Thats how i replaced all 8 feet of fill hose on my 250 Sportsman.
__________________
1983 V-20 capsized. . . . in the garage. 
|
|
|
Threaded Mode