Handrail For Center Console

[RidgeRunner]

Here are two pictures Slightly Twisted. I am not sure what model year console it fits other than the 1983. If I need to measure something let me know. handrail 001.jpg

handrail 002.jpg

[draglink]

I'll take it if Twisted passes, I'll measure my console when I get home. THANKS!

[RidgeRunner]

Sounds good, and may I say that is a very classy move there DragLink.

[nipper]

Hey Twisted, you gonna be bringing your center console back to Indiana with you?

[draglink]

Originally Posted by RidgeRunner

Sounds good, and may I say that is a very classy move there DragLink.

Thanks Vic!- Im not gonna try to snake it from somebody if they were first! But hey my console is 28" wide where this would mount. Looks like my original handrail had 3 mounts per side so it was a little different, but I think yours will work. My zipcode is 23072, do you have PayPal? Mike

[RidgeRunner]

I will measure it from flange to flange and get back to you. I am on my way to Lowe's to P/U a couple new measuring tapes. We had two die on us this week. Yes on the Paypal.

[RidgeRunner]

Well, I don't know if it will work. It measures:

29" Flange to Flange For the Forward Mounts (Closest to the wall in pic.)

29 5/16" Flange to Flange For the Rear Mounts.

I could see you tweaking it for 1/8" fit but not 1". Where were you measuring? I think the console tapers from bottom to top. Otherwise, factory could have changed up the console from 1978 to 1983. It is not bent much, if any, put a square on it and it is not out of square by much.

[draglink]

I was measuring from the top. Maybe I could cut 1/2" spacers from starboard for front and bigger ones for the rear if i needed to. My console does have about a 1/2" lip a little lower. I wish I could find a close up pic of how this mounts. I ll do a little search.....