Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs
Register FAQ Community Calendar Today's Posts Search

Reply
Thread Tools Display Modes
  #21  
Unread 09-12-2010, 12:39 PM
RidgeRunner's Avatar
RidgeRunner RidgeRunner is offline
God
 
Join Date: Aug 2009
Location: Lakeland, Fl
Posts: 2,526
Default

The parts arrived. I got the spindles welded back on the axle tube and they are as straight as I can make them. Used a straight edge and a micrometer off the straight axle tube A better picture of the bad spindle and the axle bolted back under. Sprayed Corrosion X all over the 2 yr old rusty springs.
Trailer Bearings 006.jpg

Trailer Bearings 007.jpg

Trailer Bearings 008.jpg

Trailer Bearings 009.jpg
Reply With Quote
  #22  
Unread 09-12-2010, 01:02 PM
nymack66 nymack66 is offline
God
 
Join Date: Jul 2007
Location: Orlando Florida
Posts: 1,069
Send a message via ICQ to nymack66
Default

Nice job Ridge, Grease, never install brakes and you good for many years. Nice job on the welding ..
Reply With Quote
  #23  
Unread 09-13-2010, 07:09 AM
RidgeRunner's Avatar
RidgeRunner RidgeRunner is offline
God
 
Join Date: Aug 2009
Location: Lakeland, Fl
Posts: 2,526
Default

You are too generous NYMack. It don't look good but it will work. Destroyer had me worried about penetration so I turned it up. I made two passes with the 7018 rod after tacking the spindle in place. The spindles came in slightly different than what was there. The weldable end had been turned down with a lathe to fit inside the square tubing but the turned down portion was 3/4" longer than original so instead of just placing the spindle into the square tube until it stopped at the part of the spindle that wasn't cut down (like a flange) I had to pull the spindle out 3/4" on each side and was welding to the part that was turned down. I pinned the spindle into a corner of the axle tube which made the opposite side a sloppy fit so two passes. BTW- boat shoes should never be worn while welding.
Reply With Quote
  #24  
Unread 09-13-2010, 09:29 AM
Destroyer's Avatar
Destroyer Destroyer is offline
God
 
Join Date: Apr 2010
Location: Montville, NJ
Posts: 8,236
Default

Quote:
Originally Posted by RidgeRunner View Post
BTW- boat shoes should never be worn while welding.
Don't ya just loooooove those tiny little holes in your socks and skin?


It looks good Ridge.. nice job. Well done!!
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer
1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer
1996 V21 w/1993 200HP Mercury on a Shoreline Trailer
All towed by a 5.7L Hemi Durango.


If God didn't have a purpose for us we wouldn't be here, so
Live simply, Love generously, Care deeply, Speak kindly.
(Leave the rest to God)

Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
Reply With Quote
  #25  
Unread 09-13-2010, 09:33 AM
Destroyer's Avatar
Destroyer Destroyer is offline
God
 
Join Date: Apr 2010
Location: Montville, NJ
Posts: 8,236
Default

Quote:
Originally Posted by nymack66 View Post
Nice job Ridge, Grease, never install brakes and you good for many years. Nice job on the welding ..
Actually, unless he takes off the hubs and welds on the square flange where you attach the brake backing plate he cannot install brakes. I think brakes are necessary. I know others have other opinions. Lets just agree to disagree.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer
1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer
1996 V21 w/1993 200HP Mercury on a Shoreline Trailer
All towed by a 5.7L Hemi Durango.


If God didn't have a purpose for us we wouldn't be here, so
Live simply, Love generously, Care deeply, Speak kindly.
(Leave the rest to God)

Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:38 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.