Prop Brand Suggestions

[mtnxtreme]

Originally Posted by THEFERMANATOR

I was basing the size and pitch off of what has worked on my boat as I have a simliar hull set-up and simliar HP. The 15 1/4" X 16 PT would be a good prop as well. The ENERTIA is an EXPENSIVE prop, so that is one of the reasons I didn't suggest it. The STILLETTO was reccomended to me as well, but like I said I hated it. I've got it sitting on the front porch right now. OMC aluminum props actually tend to run lower on the RPM range for props I have found as they tend to not flex like other aluminum props. Give the guys over at POWERTECH a call and ask them what they reccomend as they are good guys to work with. When I had my flats boat I had bought a MERCURY TROPHY PLUS and it wasn't working out. I called up POWERTECH and they went and helped me set my boat up and get my TROPHY working for me. They could have just sold me a new prop, but they said what I had was good and just needed set-up. That is what I call customer service. i still think a prop with alot of blade surface area is gonna be what you want since I doubt you're after speed. Most of us now are after cruising milage and holding power for the rough stuff.

http://www.propgods.com/forum/
http://www.ptprop.com/

Thats probably why they reccomended the Enertia LOL. These props you are reccomending to Wllly, should I research them also, will they work on my set-up? I see the Appolo's on E-bay a lot.