Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > General
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Unread 08-07-2010, 12:57 PM
wwatterson
Guest
 
Posts: n/a
Default

Try this troubleshooting procedure. Disconnect the fuel supply hose at the engine. Connect it to a clear plastic hose then connect the other end of the clear hose to the engine. Start the engine and look for signs of air bubbles indicating that you are sucking air somewhere vice solid gas. I used this procedure before to find the same problem. My problem was the clamp holding the vaccum hose to the pulse limiter on the crankcase had come loose. I did not have enough vaccum at high speed to suck enough gas to the fuel pump(in my case not enougn vaccum to the VRO) when trying to get on plane. If you see air bubbles then troubleshoot from there. Also try an external tuel test tank also with a clear hose to eliminate your built in fuel tank and hoses an a source of the problem.

wwatterson
1987 Wellcraft V20 Fisherman with original Sea Drive
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:44 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.