|
|
#15
06-27-2010, 02:33 PM
|
|||
|
|||
OK, 24 long days later, It is back in the water.
As you can see I have been too busy to post anything. New wiring New Switches New Batteries, boxes New Bilge pump, hose New Deck Drains and hoses New motor well drains New Seat New Gauges New under the gunnel rod boxes New fuel and oil lines, filters Motor re-painted..decals everything re-fastened..the correct way. Bottom paint removed, and re-painted. Extensive cleaning..waxing Got more to do... Here some before and after.   Door was all broken..but I had the pieces.         OK...So I got the boat for 2K on E-bay..put many many hours this last month and $2000 more into it. By the way..if anyone is looking for the deck drain hoses..which had a elbow molded into them. There is one available at a Auto part store, that has elbows on both ends. One end is absolutely perfect..the other is good. Just cut it down the middle..fine tune the exact length you need, and your good to go. It is 1" inside diameter. If anyone needs the number..let me know, the sticker tag is still on the hose.
__________________
Capt. Mike Kern 100 Ton Master 1987 V-20 cuddy 140 Johnson Barnegat, NJ Last edited by captkern; 08-02-2010 at 11:07 AM. 
|
|
|
Threaded Mode