|
|
|
|
#1
|
||||
|
||||
Get some good zinc based paint to help with the rust prevention!!
Also you can put some plywood in the boat and put a engin hoist right in the boat, this is how I did the engin coupler when I needed to. Speaking of make sure you look at all well when you have it out, Don't want to have to do it twice!! I had mine out for the pan, and 2 weeks kater I blew the engin coupler  I wish I could come by and help ya, but I am having some medical issues right now. Good Luck!!
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!! 
|
|
#2
06-07-2010, 11:30 AM
|
||||
|
||||
|
Thanks MJ, Hope all is OK...
__________________
Sorry to say that I no longer have a 1984 V20 :(
|
|
#3
06-07-2010, 02:52 PM
|
||||
|
||||
|
I will live. One other thing you are going to need a alignment tool when you reinstall the motor, to make sure all is straight
Stay away from the hacks at Atlantic! Go a few miles more to G&S they top notch!!
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
 |
|
|
Hybrid Mode
