Take a small peice of coat hanger and bend over about an inch on both ends and shove one end in the old hose and one end in the new hose. Then tape the two peices of hose together. What happens when you try to pull the two hoses aboat the bent coat hander trys to unbend in the hose and you cannot pull them apart without ripping them up. That will help keep them togethr if you have to give them a good tug when feeding the lines through. You will have to cut about two inches off the new hose because you cannot pull out the coat hanger.
|
03-26-2010, 03:00 PM
Threaded Mode