Quote:
Originally Posted by captpete13
your right reel. I don't plan on any water getting into those areas. the aft one is for the gas tank and the fwd one is for the fishbox. the pvc running down the keel will drain any water from fwd of the fishbox to the aft bilge. I really lucked out today. One of the guys I work with started to make a pen for his alligator but never finished it. Now he gave away the gator and he said I could have the pen for its plywood to use on my project. Also in the pen is a rectangular shaped pond tub. It looked like it might work for my fishbox. So I put it in the boat for a test fit. IT FITS PERFECT! Once its foamed in place it should work just fine. I'm going to put a 1 1/2" drain in the bottom and plumb it to a macerator for pumping it out. Here are some pics. Let me know what you guys think. Sure beats building one out of plywood and fiberglass.
|
Please don't laugh at me Guy's if this is silly for reasons I don't know. Why not seal off the area and use it without any insert at all for your fish box? Will the material this insert you are trying to use hold up to the elements?
01-11-2010, 11:45 PM
Threaded Mode