
08-29-2009, 08:11 PM
|
 |
God
|
|
Join Date: Mar 2007
Location: Savannah
Posts: 4,971
|
|
Just to clarify, stuff made by Permatex and Loctite was listed "not for use in contact with gasoline" or "to be used on metal only".
This is the closest thing I can find that might be the correct sealant.
Any ideas?
Gasoila Hard-Set Varnish Type Thread Sealant
 - Hard-setting, fast-drying, red varnish sealant
- Can be used on brass, copper, stainless steel, aluminum, black pipe, tin, galvanized pipe, cadmium-plated metal, rubber, porcelain, wood, marble, epoxies, cork, corpreme, asbestos, plexiglass, PVC and ABS plastic, paper, felt, and more
- Excellent resistance to all aliphatic, aromatic, chlorinated solvents; naphthas, benzenes, all petroleum products, refrigerants, freons, propane, butane, kerosene, jet fuel, water, steam and more
- NOT recommended for alcohol or oxygen
- Temperature Range: -60°F to 350°F (-52°C to 178°C) (up to 550°F (290°C) intermittently)
- Pressure Range: To 500 psi sealing face or butt joints; to 15,000 psi for threaded connections
- Dries to touch within 30 minutes; thorough drying may take 24 to 48 hours
__________________

'75 Cuddy with '00 Johnson Ocean Pro 150 horse
Benny
|