|
|
#1
|
|||
|
|||
"Spider cracks"
I'd like some advice on repairing spider cracks. I'm only assuming that is the right term for what I have on the surface of the gel coat. Please take a look at the last picture in my gallery (mine is the latest one that was posted and is on page 4). I took a close up picture of the problem. I got some gelcoat and I'm ready to go to work on some of the larger cracks, but...
Thanks in advance, Cliff
__________________
Olivia Grace - 1980 Stern Drive Cuddy 
|
|
#2
02-18-2005, 08:24 AM
|
|||
|
|||
|
Re: "Spider cracks"
Cliff,
There's a good video on gelcoat repair from bennett marine. You'll have to dig out the cracks, sand with a folded piece of paper, acetone, tape off the crack, use a tooth pick to apply to gelcoat into the crack, spray on a PVA wax, let dry, and wet sand. http://www.boatus.com/boattech/casey/02.htm http://bennettmarine.com/fiberglass_repair.html
__________________
1971 222 Hiliner 1973 23 Seacraft Center Console 1973 23 Seacraft Sceptre 1971 25 Seacraft Seafari 1972 28 Cary
|
 |
|
|
Linear Mode
