|
|
#9
10-11-2008, 08:07 PM
|
||||
|
||||
Quote:
This sounds like part of your problem. If that is a 2.0L 5800 isn't horrible, but 5500-5600 would be ALOT better. And if you have a 2.5L you need to get the RPM's down to around 5300-5500. Around 5600 the porting in a 150 MERC is pretty well out of air, they just don't run much above 5600 stock. I'm guessing since you say you have a 150, and a 17 pitch you have a 2.0L though. Try a STAINLESS prop in a 17-19 pitch range. If your after cruise and economy go with a large diameter or a 4 blade, and if your after top end go with a 14-14 1/4" 3 blade stainless.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD  AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 
|
|
|
Threaded Mode