|
|
#6
06-10-2008, 09:05 PM
|
||||
|
||||
mine did the exact same thing, I sold it before the time came to pull it apart. Tell you my thoughts, I think the vent is marginal in size to begin with and probably is not located well on the tank, especially when on a trailer and tilted back a little. Mine would blow fuel out the vent if I went to fast with the pump.
I was going to do two things which I believe would have taken care of the problem, first change out the vent fuel line and insure no blockage at the fitting, second I would relocate the vent thru hull higher on the top of the gunnel just forward of where the current vent fitting is located. I also would insure that the bend in the vent line wasnot enough to allow air to escape without forcing fuel thru the line first
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW 
|
|
|
Threaded Mode