|
|
|
|
#1
|
||||
|
||||
sean , this place is very close to me .
as far as install I would ask around at some local boat shops
__________________
1987 Dual Console / 2007 200 hp E-Tec 
|
|
#2
04-16-2008, 08:43 PM
|
||||
|
||||
|
I have a hard top coming from them at some point??
I ordered it Jan and they said it would be here 2nd week April, Now its the end of April saying no trucks want to take it unless the truck is full? My hard top is coming all one piece made for my boat. But It is holding me up!! as I have to put lights and all kinds of stuff to add to it. Hope to get it by the first of the month!! Good luck!
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#4
04-17-2008, 08:03 PM
|
||||
|
||||
|
It's an easy install. They have great directions and a video that come with the tops. The one I installed on a Whaler Outrage...if memory serves we marked where the mounting flanges should go, 5200'd them to the deck, then drilled the holes and installed screws in Epoxy. That gives you a watertight conection to the deck. Then the tower legs go into the flanges and the rest is e-z-p-z
__________________
Airslot Airslot's V-20 Gallery
|
|
#5
04-18-2008, 06:59 AM
|
||||
|
||||
|
Thank Air, The Whalers have about the same style deck (solid/foam Cored) and I am pretty dure that is the root I am goingto go. My deck is pretty close to two inches thick (gellcoat/fiberglass/wood) So I should be all set.
 If it pullls loose, I can always go back and threw bolt it to the deck.. Hopefully some more pictures to come next week Now all I need is that leaning Post before the wife catches on 
__________________
|
|
#6
04-18-2008, 07:14 AM
|
||||
|
||||
|
You'll be fine. Keep in mind that it attached at all four legs, each side of the console, plus the cross braces onto the console. The only way it will come loose is if the entire console goes with it.
__________________
Airslot Airslot's V-20 Gallery
|
|
#7
04-27-2008, 06:53 PM
|
||||
|
||||
|
Top came in last Wed and I put het together today and stuck her on deck for a dry fit. I had a couple of the Mobile Marine type guys take a look and give me a quote to do the through deck work, 400 to 700 beans for the job
 I'll pass, I figured 2 hours work max for some one who knows what they are doing. I think I'm just going to go for it and hope for the best.A few pics of the dry fit:  
__________________
|
 |
|
|
CY 1984 V20 STEP LIFT I/O 470 MERCRUISER Wheeling, WV
Hybrid Mode
