Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Unread 04-14-2008, 10:02 AM
Stillrunning Stillrunning is offline
Senior Member
 
Join Date: Dec 2006
Location: Suffolk, Va.
Posts: 972
Send a message via ICQ to Stillrunning
Default

I used Berh garage floor paint from Home Depot with a little non slipp mixed in and it has held up very well. I just hit the floor with a sander and then wiped it down with paint thinner. I only mixed about 3/4 with the anti slip which I used on the flooring. I then painted the inside of the floors storage boxes with the paint without the anti-slip. The only thing you need to be careful of is mixing in too much anti-slip. Add a little at a time and test it on a peice of wood. It does not take very much and if you do as I did the first time it was like sand paper. I then had to sand and do the jod agian. It only cost about $35.00 and if it does chip I had a little extra for a quick touch up.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:15 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.