Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs
Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
  #1  
Unread 03-18-2008, 06:05 PM
tsubaki's Avatar
tsubaki tsubaki is offline
God
 
Join Date: Mar 2007
Location: Savannah
Posts: 4,971
Send a message via ICQ to tsubaki
Default

Where you at? Kilkenny, Ft. McCallister or somewhere else?
This would be a good project to do yourself. There are couple of threads on replacing the floor tank if needed. No it ain't easy but it will work or not, nothing inbetween.
First pull the boat out and determine what's going on.
__________________

'75 Cuddy with '00 Johnson Ocean Pro 150 horse

Benny


Reply With Quote
  #2  
Unread 03-18-2008, 06:40 PM
fishingwithblue's Avatar
fishingwithblue fishingwithblue is offline
Senior Member
 
Join Date: Mar 2008
Location: Richmond Hill, GA
Posts: 371
Default

Quote:
Originally Posted by tsubaki View Post
Where you at? Kilkenny, Ft. McCallister or somewhere else?
This would be a good project to do yourself. There are couple of threads on replacing the floor tank if needed. No it ain't easy but it will work or not, nothing inbetween.
First pull the boat out and determine what's going on.
I live in Waterford Landing in Richmond Hill. The boat is at the community marina. You are right, time to pull it out. Any advice on the fuel(50 plus gallons)? I think I need to back up and punt. She rides so well but first things first.
__________________
1984 Wellcraft V20 Steplift Cuddy
2004 200 HP Evenrude


USCG Captain Brent Highsmith
Kayak.Fish.StCatherines
Mothership Charters

email [email protected]
Reply With Quote
  #3  
Unread 03-18-2008, 07:09 PM
tsubaki's Avatar
tsubaki tsubaki is offline
God
 
Join Date: Mar 2007
Location: Savannah
Posts: 4,971
Send a message via ICQ to tsubaki
Default

First determine if there is a fuel cell leak ,removing the boat from the water, if so, 5 gallons at the time are easily handled (hope you got a pickup). Just siphon (you'll be a pro after this) and save (unless it's not mixed with oil) for reinstallation. The cost of the 5 gallon tanks will be nothing compared to the work involved and later they will be apreciated.
There are not many boat mechanics in this area that will profess to doing this work in a cost efficient manner. I do my repairs myself and won't suggest any references, reasoning being, by the time a good mechanic is found at a shop, he has moved on somewhere else. Ask someone you know and trust to make a reference to do work.
There is no other boat that rides like these and handle as such, they are well worth the renovations (not monitarily but piece of mind) and endless labor of upkeep (as every boat is).
Let us know about progress (and pictures).
__________________

'75 Cuddy with '00 Johnson Ocean Pro 150 horse

Benny


Reply With Quote
  #4  
Unread 03-18-2008, 07:16 PM
tsubaki's Avatar
tsubaki tsubaki is offline
God
 
Join Date: Mar 2007
Location: Savannah
Posts: 4,971
Send a message via ICQ to tsubaki
Default

HAMMER (mia), Mulv, whatknot and the other guys that have replaced the belly tank. What's all involved with replacing the tank.
Anybody please find the threads.
__________________

'75 Cuddy with '00 Johnson Ocean Pro 150 horse

Benny


Reply With Quote
  #5  
Unread 03-18-2008, 07:50 PM
Stillrunning Stillrunning is offline
Senior Member
 
Join Date: Dec 2006
Location: Suffolk, Va.
Posts: 972
Send a message via ICQ to Stillrunning
Default

Well before you go draining the gas I would check all the lines and any thing else that might be leaking. I pulled my tank after checking everything I could think of and it was not the tank. I finally found that the nipple that the vent hose conects to had cracked and after I filled the boat and then added oil gas leaked out of this crack. It took time for it to leak out of the boat and it seemed that it was just a continous leak. If you have to drain the tank just by some 5 gallon cans, disconect the fuel line from the motor, stick the hose in a can and pump the ball to get things flowing. It takes some time so just keep an eye on the can nad change them out as needed. Also the last can of gas take it and shake it up and dump some into a jar and see how it looks. I found my last can was pretty dirty and had some water in it so I did not put that back into the boat.
Reply With Quote
  #6  
Unread 03-18-2008, 08:09 PM
fishingwithblue's Avatar
fishingwithblue fishingwithblue is offline
Senior Member
 
Join Date: Mar 2008
Location: Richmond Hill, GA
Posts: 371
Default

Quote:
Originally Posted by Stillrunning View Post
Well before you go draining the gas I would check all the lines and any thing else that might be leaking. I pulled my tank after checking everything I could think of and it was not the tank. I finally found that the nipple that the vent hose conects to had cracked and after I filled the boat and then added oil gas leaked out of this crack. It took time for it to leak out of the boat and it seemed that it was just a continous leak. If you have to drain the tank just by some 5 gallon cans, disconect the fuel line from the motor, stick the hose in a can and pump the ball to get things flowing. It takes some time so just keep an eye on the can nad change them out as needed. Also the last can of gas take it and shake it up and dump some into a jar and see how it looks. I found my last can was pretty dirty and had some water in it so I did not put that back into the boat.
Thank you sir. Check all connections to and from fuel cell first.
__________________
1984 Wellcraft V20 Steplift Cuddy
2004 200 HP Evenrude


USCG Captain Brent Highsmith
Kayak.Fish.StCatherines
Mothership Charters

email [email protected]
Reply With Quote
  #7  
Unread 03-18-2008, 08:34 PM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default

Welcome to the site & congrats on the new crew member. These are great boats for families. I have an 83 cuddy, did you take off the inspection plates and check the fill hose and vent hose that is in the forward deckplate, the rear one is where the motor connection is and the guage sending unit. My fill hose was rotted and it only leaked gas when i was filling it up. you can check that aand not have to pull the tank cover...
Reply With Quote
  #8  
Unread 03-18-2008, 07:48 PM
fishingwithblue's Avatar
fishingwithblue fishingwithblue is offline
Senior Member
 
Join Date: Mar 2008
Location: Richmond Hill, GA
Posts: 371
Default

Quote:
Originally Posted by tsubaki View Post
First determine if there is a fuel cell leak ,removing the boat from the water, if so, 5 gallons at the time are easily handled (hope you got a pickup). Just siphon (you'll be a pro after this) and save (unless it's not mixed with oil) for reinstallation. The cost of the 5 gallon tanks will be nothing compared to the work involved and later they will be apreciated.
There are not many boat mechanics in this area that will profess to doing this work in a cost efficient manner. I do my repairs myself and won't suggest any references, reasoning being, by the time a good mechanic is found at a shop, he has moved on somewhere else. Ask someone you know and trust to make a reference to do work.
There is no other boat that rides like these and handle as such, they are well worth the renovations (not monitarily but piece of mind) and endless labor of upkeep (as every boat is).
Let us know about progress (and pictures).
I was referred to Jerry Adams but I would rather do it myself to learn my boat. Just anxious. Should I use a syphon pump in the fill whole or on the tank itself after removal of the deck? Then store it in 5 gallon portable tanks...correct? Also you said "unless its not mixed with oil" My gas is not pre-mixed, do I save it? Pics are uploaded to photobucket and Im trying to get them here. Took them this evening at sundown. People stop and stare at that boat like their at a car show...cant blame them.
__________________
1984 Wellcraft V20 Steplift Cuddy
2004 200 HP Evenrude


USCG Captain Brent Highsmith
Kayak.Fish.StCatherines
Mothership Charters

email [email protected]
Reply With Quote
  #9  
Unread 03-19-2008, 12:03 AM
bradford's Avatar
bradford bradford is offline
God
 
Join Date: Nov 2006
Location: Wilmington Island, Georgia
Posts: 4,879
Default

Welcome to the site!

I had a couple of FIST SIZED holes in my tank which resembled swiss cheese. I'd check all other avenues (fittings, hoses, etc.) first. If you do have a leaky tank pulling it isn't that technically difficult, just a good way to waste a saturday. I did mine in a way similar to whale before I knew about this site or even had a computer. I gave a detailed post a while back how I did it. Do it yourself and save your money for fun stuff.

p.s. Be SURE to evacuate all gas and more imporatantly fumes from your boat before tearing into this project, or else you could end up like the sugar refinery!
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD
1979 Marine Trader 44, twin Ford Lehman 120s
2006 Panga 14, Tohatsu 20
Reply With Quote
  #10  
Unread 03-19-2008, 06:52 AM
whatknot's Avatar
whatknot whatknot is offline
Senior Member
 
Join Date: Jul 2007
Location: Hobe Sound, Florida
Posts: 189
Default

hey, if you have a 60 gallon tank, stay with it dude. If your fishing habits ever change, you won't be held back by fuel. If this link works, it should take you to a Fuel Tank Specs directory. If not, do a search for it. I did a schematic of my 60 gallon tank and if you scroll down I show ya where I had it made. Quality job too!

http://www.wellcraftv20.com/communit...uel+tank+specs
__________________
http://i188.photobucket.com/albums/z...t/IMG_2009.jpg&&\"Ain't no shame in fishin' on the bottom.I came up with this at a bar real late.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:20 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.