|
|
#1
|
||||
|
||||
Hull Back In One Peice...
Just finished re-attaching cap to hull...previous owner's rigger replaced rub-rail and did pi$$-poor job...you could actually lift the cap off the hull :o...anyway, removed rub-rail, drilled out all rivets, removed all other attachments, took jack and blocks under cuddy and up she went! Ran 3/4"x1 1/2" Starboard strips around inside of hull with counter-sunk #10 screws(SS)...dropped the cap back down and installed 100 or so of same screw catching Starboard strip. but not torking down...unloaded 4 tubes of 3M 4200 around gap between cap and hull, let cure then torked all the screws...she TITE now!...re-attached rub-rail w/another 100+ screws an' now I are a fishinman agin!... ;D
Moral of story: man who buy used boat w/out liffin' up on rub-rail could be in for a lot of screwin' ::)
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#2
11-24-2004, 03:10 PM
|
||||
|
||||
|
Re: Hull Back In One Peice...
Glad to hear it's back together there Confusious. ;D ;)
__________________
Heavily medicated for your protection.
|
|
#3
11-27-2004, 01:48 AM
|
||||
|
||||
|
Re: Hull Back In One Peice...
Moral of my story: man who buy used boat w/out checking springs on trailer in for a lot of screwin' too!
After a couple days worth of screwin' I was able to get the 4 leaf springs off my trailer. 2 of em where half broke in two. Funny how I didn't notice that till I brought er home. The bright side is, while I've got these 2 axles off to replace the springs, I'm gonna replace the bearings and bearing buddies. Not to mention get a good coat of paint on all of that stuff. When I'm done the 79 model trailer will be good as new. The galvanized part is already in excellent shape. I also bought a new wench. I won't be afraid to drag er down the road! Blue
__________________
 1994 Wellcraft V21
|
|
#4
11-27-2004, 10:11 AM
|
||||
|
||||
|
Re: Hull Back In One Peice...
Quote:
Oh............................you meant a new winch? ;D Get some of that good galvanizing paint they sell in marine stores and coat the new stuff. It's good paint. ;)
__________________
Heavily medicated for your protection.
|
|
#5
11-27-2004, 12:57 PM
|
||||
|
||||
|
Re: Hull Back In One Peice...
Hey Blue_Runner, I have some Stainless Berrin Buddy's with caps. I bought them for my new trailer that has a different type of system and I don't need them.
They are brand new never used!! I think I payed almost $50 with the shipping. I will let you have them for $20 + shipping. They have been opened but not used!! I have all 4 for both axles. They are Model # 1980A-SS and fit, *1.980 in Hub Just let me jnow if you want! 
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#6
11-27-2004, 04:58 PM
|
||||
|
||||
|
Re: Hull Back In One Peice...
Nice catch CB! Bill Mc ;D
__________________
 Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug
|
|
#8
11-27-2004, 05:26 PM
|
||||
|
||||
|
Re: Hull Back In One Peice...
Wench's are fun! ;D
__________________
Heavily medicated for your protection.
|
 |
|
|
Linear Mode
