|
|
|
|
#1
|
|||
|
|||
Yep, the head had rusted out on the exhaust ports. So while I had it out and apart, I went through the bottom end and freshened it up a little. A couple of pistons had rust particals embedded in the tops. It had been bored .040 over. I honed the cylinders really lightly and put it back together. Everything looked good.
__________________
 77 V20 cuddy with 170 I/O Mercruiser 72 16ft. Carolina w/a 25hp Evinrude 
|
 |
|
|
Hybrid Mode
