|
|
|
|
#1
|
||||
|
||||
Whale, I had a plastic tank custom built in '04. Used the exact dimensions of the original tank as supplied by Florida Marine Tanks (who make or made aluminum tanks), which were 44" L x 31" W x 11" H (I left out the fractions). Sent them to Triple "M" Plastic Products in Maine, got a quote and had them build it. Here's a pic of it:
http://www.wellcraftv20.com/gallery/...d=P9240525_001 The tank, including a fuel gauge sending unit, was just under $500 not including shipping. I still have the drawings, if you want I can fax them to you, or try to e-mail them if I can figure out how to use my boss' scanner. ;) 
|
|
#2
01-09-2008, 02:20 PM
|
|||
|
|||
|
Quote:
|
|
#3
01-09-2008, 05:06 PM
|
|||
|
|||
|
These guys have one that will fit perfectly, but they won't sell it to you.
They only sell to boat manufacturers. http://www.incaproducts.com/site/fue...atvbottom.aspx
__________________
*************************************** Stay Safe!  Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
|
#4
01-09-2008, 08:05 PM
|
||||
|
||||
|
Quote:
http://cgi.ebay.com/ebaymotors/BOAT-...spagenameZWD1V
__________________
Old School 1985 V20 cuddy, 1999 Johnson 115 Armstrong Bracket 
|
|
#5
01-11-2008, 01:02 AM
|
||||
|
||||
|
Fly has his for sale again, ebay did not work out Ck for sale section, he will help with ship if you can find some one that will take it?
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#6
01-11-2008, 11:43 AM
|
|||
|
|||
|
Quote:
I can tell you that the 40 gal Inca fits perfectly, thats what I have. Got mine from Flounder Pounder Marine.
__________________
*************************************** Stay Safe! Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
|
#7
01-30-2008, 07:06 PM
|
||||
|
||||
|
Well, after much thought I decided to go with the 40 gallon INCA tank that is on Ebay. I really never go far from my marina....10 miles at most. Considering the cost was so much less ($129 plus $60 shipping) it was hard to justify the hundreds extra for 20 more gallons that I really don't need. I ordered it and it arrived last week. Just waiting for some warm weather to install. Since it is shorter than the original I need to figure out how to stabilize it to keep it from moving around. Suggestions?
I also bought a replacement voltage gauge from the same seller for 10 bucks. The existing gauge was off such that when powered off (and disconnected) it read about 12 volts and when power was on it pegged to the max. The new one is identical and works fine. Last season, none of the 4 small gauges worked (tach worked and warning alarms in it were fine) so my goal is to have all of them working. Some may consider some of them useless but since they are they I'd like to have them functioning. The tilt/trim gauge never moved and I found the arm on the sender was stuck down. After a few manual actuations, it was working fine and the gauge works. The water pressure gauge was not working at all....I am about to get one for cheap on Ebay. Last will be the fuel gauge. Maybe with a new sender that came with the tank, the gauge will work??? I'll post pics when I do the new tank install.
__________________
Old School 1985 V20 cuddy, 1999 Johnson 115 Armstrong Bracket
|
|
#8
01-30-2008, 10:31 PM
|
||||
|
||||
|
That will be fine!!
If it was me, I would measure from the bulk head to were the tank goes and add a new bulk head and you will have the size you need to make it nice and tight!
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
|
#9
03-25-2008, 11:15 AM
|
||||
|
||||
|
Quote:
__________________
1984 Wellcraft V20 Steplift Cuddy 2004 200 HP Evenrude USCG Captain Brent Highsmith Kayak.Fish.StCatherines Mothership Charters email [email protected]
|
 |
|
|
Hybrid Mode
