Going to check out a '93 tomorrow

[macojoe]

Iboat says!

that motor is blown or severly neglected. run,run away.
a 30 psi spread is very very bad.
good luck and keep posting
PS if you really want to know the condition of the cylinder sealing have a leak down test done. its much more accurate than compression.
--------------------------------------------------------------------------------
Posts: 3075 ***124; From: Kitty Hawk NC ***124; Registered: Sep 2003 ***124; IP: Logged ***124;

===============================

I have a 225 from the same year. Definitely check for corrosion, but also it should have had new thermostats & water pump and a carb rebuild at least once in its life....
--------------------------------------------------------------------------------
Posts: 179 ***124; From: Boston ***124; Registered: Jul 2004 ***124; IP: Logged ***124;

================================