![]() |
|
#11
|
|||
|
|||
|
Hey Reel,
Sorry if this is hi-jacking the thread a bit. I just got my first GPS/FF unit ever (LCX-111c) .. and will install for spring. Does the separate antenna have to be mounted external ... or can I hide it away in the cuddy or elsewhere. I was reading over at THT ... that the antennas will work thru fiberglass ?? Brian
__________________
'86 Cuddy (FICHT 150 on brkt) ------ 1988 V20 project in the garage |
|
#12
|
|||
|
|||
|
Hey Reel,
Sorry if this is hi-jacking the thread a bit. I just got my first GPS/FF unit ever (LCX-111c) .. and will install for spring. Does the separate antenna have to be mounted external ... or can I hide it away in the cuddy or elsewhere. I was reading over at THT ... that the antennas will work thru fiberglass ?? Brian
__________________
'86 Cuddy (FICHT 150 on brkt) ------ 1988 V20 project in the garage |
|
#13
|
||||
|
||||
|
Cant tell from Lowrance web site if it will work. Did find the model number for my antenna, FA-4. Dont know which one you have.
Turbo.
__________________
1984 V-20 Center Console 1985 90 hp Merc. American by birth, Southern by the grace of GOD. Never let your hobby become a job but rather let you job become your hobby. http://www.wellcraftv20.com/gallery/turbine_doc_84_cc |
|
#14
|
||||
|
||||
|
Cant tell from Lowrance web site if it will work. Did find the model number for my antenna, FA-4. Dont know which one you have.
Turbo.
__________________
1984 V-20 Center Console 1985 90 hp Merc. American by birth, Southern by the grace of GOD. Never let your hobby become a job but rather let you job become your hobby. http://www.wellcraftv20.com/gallery/turbine_doc_84_cc |
|
#15
|
||||
|
||||
|
Brianct12...no, I would NOT tuck it away somewhere ...it NEEDS to be out in the open somewhere ...it comes w/ a mount, but I did not use ... here's where I put mine...outta the way, but open to the sky ...
![]() ....at the end of the slider track w/ the ''pancake'' flat down on the deck ...it'll need 5/8'' hole thru the deck to get the wire-plug thru and four holes for the screws to go thru... there's a rubber seal on the bottom of the pancake that'll keep all moisture, etc. out...this has worked well on mine since '99 ...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#16
|
||||
|
||||
|
Brianct12...no, I would NOT tuck it away somewhere ...it NEEDS to be out in the open somewhere ...it comes w/ a mount, but I did not use ... here's where I put mine...outta the way, but open to the sky ...
![]() ....at the end of the slider track w/ the ''pancake'' flat down on the deck ...it'll need 5/8'' hole thru the deck to get the wire-plug thru and four holes for the screws to go thru... there's a rubber seal on the bottom of the pancake that'll keep all moisture, etc. out...this has worked well on mine since '99 ...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#17
|
||||
|
||||
|
Hey RAP. I don't know if you've answered the question in the past or not; but what are the six flush mounts just inside your bow rail for? Snaggers?
__________________
Heavily medicated for your protection. |
|
#18
|
||||
|
||||
|
Hey RAP. I don't know if you've answered the question in the past or not; but what are the six flush mounts just inside your bow rail for? Snaggers?
__________________
Heavily medicated for your protection. |
|
#19
|
||||
|
||||
|
Yup, they're Snaggers alright...there are 12 around the outside ...for cut-baitin' while anchored, down-lines and most of all, slow (elec. motor) trollin' live herring...
![]() they've pretty much become standard issue for striper-fishin' around here... ;) ...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#20
|
||||
|
||||
|
Yup, they're Snaggers alright...there are 12 around the outside ...for cut-baitin' while anchored, down-lines and most of all, slow (elec. motor) trollin' live herring...
![]() they've pretty much become standard issue for striper-fishin' around here... ;) ...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
![]() |
| Thread Tools | |
| Display Modes | |
|
|