V parts in NJ

[RWilson2526]

No enclosure yet. The guy has been real good about communicating so far. He wasnt sure if he was going to be able to show me the stuff today. He said if not today than tomorrow. Will keep you posted.

[Airslot]

Looks like I need a hatch cover. I've been keeping the boat in the water and when I went to check on her today I had a little damage from the last storn, including losing a hatch cover?

[RWilson2526]

Well Christmas came late at the Wilson's. Sorry Svence but the enclosure is gone. Was hoping it was going to be black or red but green will do. All together I picked up the enclosure, a nice 1 year old back to back seat (with a nice high base) and a 2 year new fuel tank for $700 total. My current fuel tank does not seem to leak but it is original so its just a matter of time.

After I show off my new stuff I'm attaching pics of all the other stuff he has. He really doesnt have any prices in mind so if anybody wants something throw a number out there. I think he was happy to get my $700 so anything after that is gravy. I'll be glad to pick the stuff up and mail it to anybody or hold on to it until you might find yourself in this part of the woods. I'd be glad to contact him as well on any one's behalf.




the only damage we could find from the accident were a couple of small holes in the boot , no big deal.


This is the front piece, as I was hoping he split the panel in the middle so you can walk through to the cuddy and he also cut in a flap in front of the helm so you dont have to look through plastic if you dont want to.









I was surpised how dirty the cushions looked in the picture. They really dont look that bad at all. No rips at all.








there are 2 holes drilled into the face of this cover that you cant see, he had a rod holder mounted to it.








the rod holders were in decent shape. Alot of the flange was missing but the visible portions were all there. he spent alot of time repairing them

[bsteckel]

nice job!!! enclosure looks great ...

i have a 20' center console .. after looking at deshet's boat for sale , it looks like some of the parts are similar to my boat's

i need the buckets that go in the transom hatches

i need the anchor locker door

i need the fish box cover.

also looks like the cushions will fit the bow of my boat as well.

my fish box cover was never with the boat .. my anchor door was made out of wood, but should it be the smoked plexi ???

how can i make sure his parts will fit??

interested in the above

i live in PA about 30 min from the del water gap.

thanks

[RWilson2526]

Originally Posted by bsteckel

nice job!!! enclosure looks great ...

i have a 20' center console .. after looking at deshet's boat for sale , it looks like some of the parts are similar to my boat's

i need the buckets that go in the transom hatches

i need the anchor locker door

i need the fish box cover.

also looks like the cushions will fit the bow of my boat as well.

my fish box cover was never with the boat .. my anchor door was made out of wood, but should it be the smoked plexi ???

how can i make sure his parts will fit??

interested in the above

i live in PA about 30 min from the del water gap.

thanks

BSteckel, Without running over there I can check the dimensions on my boat as it is the same year and is safe to assume at this point dimensionally identical to his. Its cold and dark at the moment but hopefully tomorrow I can crawl under the cover and get you the dims.

not sure which one you are calling the anchor door. the pic of the smoked plexi door with wellcraft on it goes over the access in the stern on our cuddy models if thats what you are referring to. maybe its the same door on the center console anchor locker? I will get you dim's and let you decide.

[bsteckel]

rwilson ...

that would be much appreciated ... from photos is saw the fish box looks similar to mine.

the front most storage area in my boat is where the anchor is ... my door is made out of plywood or simialr from the prior owner .. it looks like it is 2 pieces .. the door itself and then another piece of wood on the top .. like a molding ???

those measuremens will help out a great deal !!!

thanks again.

Brad

[Airslot]

I'd loike to get the rear hatch covers. I don't need the storage bins that were under them. Let me know something.

'Slot

[RWilson2526]

Brad,


Smoked plexi anchor/splashwell cover: 18 1/2" wide x 12 1/2" high mounting holes for hinges are on the right side.

Fish box door is 35 1/2" x 17 34/"

plastic boxes are 11 3/8" x 6 7/8" at the widest point just under the flange

Cushion dimensions are below. Dimension could vary an inch or so depending upon how tightly you piece them together

[RWilson2526]

Originally Posted by Airslot

I'd loike to get the rear hatch covers. I don't need the storage bins that were under them. Let me know something.

'Slot

Slot, how would you like to work out the logistics. you got a dollar figure in mind.

Easiest way I guess is let me know how much you want to pay. You can paypal me the money, I'll go pick them up and mail them to you. Of course you can just deal directly with him as well but he didnt seem to want to be bothered with mailing things all over the country when we spoke.

Send me a PM if you want

[msbhammer]

Whats the deal with the aluminum brake next to the bow rail. I'm looking for a cheap used brake, so I can bend metal for all my coil stock work on my garage. ???