Patching a Crack in My '73

[Blue_Runner]

I've got some system 3 "quick fair" that I'm using to fill and fair the crack that RB found. I applied a first coat yesterday evening. This evening I will go back and sand it down and apply another skim coat. Then next week when I get back from the beach I will sand that smooth and seal it up with some system 3 two part epoxy.


Here are some of the tools of the trade. Plastic silverware makes great mixing tools and applicators!
Note: I did not use the huge spackle. Should have known it wasn't right for the job ::)


And here is the boat:
















The Crack - WARNING! CRACK KILLS! Note: This boat is no stranger to bottom patching. PO must have been a "shallow water fisherman" LOL. I cleaned and sanded it nice and smooth and then feathered on the quick fair. This stuff can be hand sanded in 3 hrs and machine sanded in 4 hrs. Hence the name "quick fair" ;)




I know some will ask, so here is dad's smoker (custom built) and burn down barrel (old air tank).

[Blue_Runner]

I forgot to mention I have a local guy that has said he is buying it! I'm so happy for the boat. What's great is he is planning on using it at High Rock lake so I will still get to see her 8)

[msbhammer]

Blue, you have any access to the inside of the hull where the crack is, if so, maybe thow on some cloth and resin.
So whats the final price you gonna let her go for.
Thats one nice V you have Blue. ;)

[Blue_Runner]

I've got some system 3 "quick fair" that I'm using to fill and fair the crack that RB found. I applied a first coat yesterday evening. This evening I will go back and sand it down and apply another skim coat. Then next week when I get back from the beach I will sand that smooth and seal it up with some system 3 two part epoxy.


Here are some of the tools of the trade. Plastic silverware makes great mixing tools and applicators!
Note: I did not use the huge spackle. Should have known it wasn't right for the job ::)


And here is the boat:
















The Crack - WARNING! CRACK KILLS! Note: This boat is no stranger to bottom patching. PO must have been a "shallow water fisherman" LOL. I cleaned and sanded it nice and smooth and then feathered on the quick fair. This stuff can be hand sanded in 3 hrs and machine sanded in 4 hrs. Hence the name "quick fair" ;)




I know some will ask, so here is dad's smoker (custom built) and burn down barrel (old air tank).

[Blue_Runner]

I did patch the inside with some of the quick fair but could not get a picture - too dark. I think its gonna hold up just fine once I'm done.

$1200

[Blue_Runner]

I forgot to mention I have a local guy that has said he is buying it! I'm so happy for the boat. What's great is he is planning on using it at High Rock lake so I will still get to see her 8)

[Stillrunning]

Looks good, but your dads got you beat with that smoker. MMMM.... I can smell BBQ cooking here in VA.

[msbhammer]

Good deal on the sale Blue. ;)

[msbhammer]

Blue, you have any access to the inside of the hull where the crack is, if so, maybe thow on some cloth and resin.
So whats the final price you gonna let her go for.
Thats one nice V you have Blue. ;)

[Blue_Runner]

SR - he does have a nice smoker. Thats fo sho!