1981 V20 Restoration

[Dana A]

Started playing with the liner, little modification to marry up to the transom
Stringers had 1/8 to 1/2 inch gaps filled with goop before we pulled the liner.
Workmanship in the hull looks like it was started on a Monday and finished Friday afternoon. liner was a different team ! Set our forms on the stringers with the liner in, put in temporary now till the next batch of seacast arrives
encasing the rod compartments in glass too
IMG_5599.jpg

IMG_5709.jpg

IMG_5708.jpg

IMG_5686.jpg

[Dana A]

IMG_5701.jpg

[nymack66]

One of the best V for 2021 for sure when you are done with this baby. I have to do my stringers one day, they a-ok for now

[Dana A]

A lot going on and not much time to post
Got the stringers done to height after putting the liner in for measurements, back off last night and hull moved into glass bays for capping off the stringers today
Have decided to rework the liner too since were in this deep, pulling all hardware off it, new bulkheads and more.
Restoring original teak.





IMG_5967.jpg

IMG_5975.jpg

IMG_5719.jpg

IMG_5760.jpg

IMG_5821.jpg

[Dana A]

Did a test area of bringing back the original gelcoat. first pass on the gelcoat with 400 in the picture, will most likely go to 800, then 1200 and then to 1500 (or more) if needed. The 400 seems to bring the color back about 80%.
Nice thing is they were not bashful with the gelcoat back in 81, pretty thick




IMG_6019.jpg

IMG_6020.jpg

IMG_6037.jpg

IMG_6089.jpg

IMG_6092.jpg

[Dana A]

A few more from yesterdays progress. I just love the quality of the 80's teak




IMG_6102.jpg

IMG_6107.jpg

IMG_6111.jpg

IMG_6110.jpg

IMG_6108.jpg

[Dana A]

Had her in for a fitting and sizing Sunday
Working the oxidation off on the hull and think paint job on the liner might be in order


IMG_6366.jpg

IMG_6375.jpg

IMG_6288.jpg

IMG_6294.jpg

IMG_6296.jpg