Newbie/lurker

[Destroyer]

Yep. she's a looker all right. Nice boat!! Welcome aboard. Always good to have another new member!!

This is how I have my kicker mounted:

[NW_Wellcraft90]

Pretty! How fast does your Merc push you? On flat glass we've taken ours to 49 according to the dash
Thank you for the welcome

Is that 200 mounted to a bracket? Factory?

Originally Posted by Destroyer

Yep. she's a looker all right. Nice boat!! Welcome aboard. Always good to have another new member!!

This is how I have my kicker mounted:

[bradford]

Welcome, she looks great!

[scook]

Hah, another Columbus River guy***128512;. Where are you located? I'm out just west of Portland. Mine's an '85 I/O but I did a litttle fishing with a Camas guy with an outboard.

If you decide to set it up with a rocking chair anchor, let me know. I've done mine and might have some useful ideas about getting the sliding hatches out of the way. You can email me at Scott at cookconst dot net.

Welcome to the site.

[NW_Wellcraft90]

Originally Posted by scook

Hah, another Columbus River guy***128512;. Where are you located? I'm out just west of Portland. Mine's an '85 I/O but I did a litttle fishing with a Camas guy with an outboard.

If you decide to set it up with a rocking chair anchor, let me know. I've done mine and might have some useful ideas about getting the sliding hatches out of the way. You can email me at Scott at cookconst dot net.

Welcome to the site.

Scott, we are on the east side, spring time we launch out of the gleason ramp, come fall we like to launch at chinook and run up to the mouth of the sandy. So far we have anchored a few times and it is not terribly difficult, just slide the hatches all of the way foreward. I can lay on the bow, release the anchor, then drop back to the helm area and let the anchor go. We have about a 15ft tail that hangs back in the cabin and if we need to drop out just tug on the rope to get it off the cleat and away we go. Definately open to suggestions to make it simpler.

[Destroyer]

Originally Posted by NW_Wellcraft90

Pretty! How fast does your Merc push you? On flat glass we've taken ours to 49 according to the dash
Thank you for the welcome

Is that 200 mounted to a bracket? Factory?

Dash mounted speedometers are notoriously inaccurate. Use a GPS for a much more accurate reading. I've hit 53 in the Hackensack River on a flat day, but I was going downstream at the time so I don't know how fast the current was. My COG was 53 but my COW was probably less. (It's a fairly slow moving river though).

The boat in the pictures is my V21. They (Wellcraft) put a "bubble" on the stern of the boat to hang the engine from. It's not a bracket, it's actually a factory made part of the transom. That's how they get to call the boat a V21 instead of a V20. Kind of like modern day boats with "Mediterranean" swim platforms molded in. The makers add 2 feet of swim platform molded in and get to call a 19 foot boat a 21 footer.

[NW_Wellcraft90]

Originally Posted by Destroyer

Dash mounted speedometers are notoriously inaccurate. Use a GPS for a much more accurate reading. I've hit 53 in the Hackensack River on a flat day, but I was going downstream at the time so I don't know how fast the current was. My COG was 53 but my COW was probably less. (It's a fairly slow moving river though).

The boat in the pictures is my V21. They (Wellcraft) put a "bubble" on the stern of the boat to hang the engine from. It's not a bracket, it's actually a factory made part of the transom. That's how they get to call the boat a V21 instead of a V20. Kind of like modern day boats with "Mediterranean" swim platforms molded in. The makers add 2 feet of swim platform molded in and get to call a 19 foot boat a 21 footer.

Neat little bubble, yeah I know the dash speedos can be innacurrate. A guy I work with has a 20ft trophy with a 150 honda, he came out with us on the first run and it was very easy to accelerate past him at full throttle. He shot that first photo