![]()  | 
	
| 
		 
			 
			#1  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
			
			 
			
			Hi Everyone, 
		
		
		
		
		
		
			I have an '85 V20 with a 150hp Yamaha outboard. In doing my spring (if it ever gets here!) prep, I noticed that the drain hose on the starboard outside drain needs to be replaced. Unfortunately due to my short arms and ample stomach girth, I am unable to get to the fitting through the aft storage compartment. There is no one nearby with long arms that I trust to do the job for me, so I was thinking about cutting an access opening in the fiberglass under the aft seat, replacing the hose, and then fitting an access cover to close the hole I made. Any suggestions/recommendations would be greatly appreciated. Thanks! Roger 
				__________________ 
		
		
		
		
		
	
	Roger '84 V20 with 2000 150 HP Yamaha 2 stroke  | 
| Thread Tools | |
| Display Modes | |
		
  | 
	
		
  |