|
|
|
|
#1
|
||||
|
||||
fiber disk cleaning
I figured out a little trick today for prolonging the life of your fiber disks on your grinders. I catch myself throwing them away after they get loaded up with wax. Today I soaked one for about a minute in acetone and then stroked it with a wire brush and it came out like brandnew. Im sure this has been thought of before but I figured I'd share.
|
|
#3
04-27-2013, 04:46 PM
|
||||
|
||||
|
no not really. just taking it one step at a time. I have alot going on. Im hoping to have it done in about 2 months.
|
|
#4
05-01-2013, 09:43 AM
|
||||
|
||||
|
Quote:
I think that's wise...a target date as priority instead of what you want to get done is a self-imposed SQUEEZE...you're on course to have a really nice CC once yer done...and that'll happen in it's own good time...I've really enjoyed watching the progress you've made!!... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#5
05-01-2013, 03:07 PM
|
||||
|
||||
|
Thanks REEL, I am ready to fish this thing!!!
|
|
#6
05-04-2013, 08:04 AM
|
||||
|
||||
|
Thanks rain!!! Thanks alot!!! 20% is now 100%!!!!
|
|
#7
05-17-2013, 02:28 PM
|
||||
|
||||
 all glassed up and roughly blocked in.  as you can see the floor penatration have been hotcoated then one strip of CSM around the perimeter and 3 coats of gelcoat.  all holes that go thru the core ply are hotcoated and 3 coats of gelcoat are to follow. the key is to seal up all wood properly. all holes holes in the transom are treated the same. the holes on the transom are over drilled by a 1/2 inch then refilled with a fiber reinforced thickend resin then 2 layers of CSM are glassed on like patches on both sides. I then redrill my holes and its protected by a 1/4 inch ring of glass. then i put 2 coats of gelcoat on the holes. Its completely overboard but I just want to protect my core ply
|
|
#8
05-17-2013, 06:22 PM
|
||||
|
||||
 Takes alot of beer to grease this wheel!!!! 
|
|
#9
05-05-2013, 09:30 AM
|
||||
|
||||
Quote:
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|
|
#10
05-06-2013, 04:43 AM
|
||||
|
||||
|
glassed 8 more feet of the covering boards yesterday. Each little bit of work i do gets me closer to finish. After all the glass work is done I will have help fairing the boat out and painting it. will have pics later
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
