|
|
|
|
#1
|
|||
|
|||
I've heard only good things as well but haven't actually used it yet. I would be interested in hearing your impressions if you use their product. I also understand it can be a little expensive, have you got a estimate of cost for the material needed to cover the V? Are you painting the entire hull or just above the water line. Are you going to apply via roll and tip or spray?
kamikaze
__________________
 74 V20 CC with a 150 Johnson (Gone but not forgotten) 89 V20 Cutty with a Tower (Build in process) 
|
|
#2
02-22-2013, 07:37 AM
|
|||
|
|||
|
Kamikaze when i spoke to the owner of Signature we were both on cell phones and it was very hard to understand him ,he said the price but i told him i t was hard to hear and i would call him back today . I am going to paint the hull from the bottom paint up to the rubrail the popular Fighting lady yellow and then from the rubrail up onto the top of the gunnel's a white close as i can get to the original gelcoat . not sure how that will work out yet the boat is covered and i'll have to take a closer look and plan it out. I may just have to paint all the way down to the deck. I think i will be rolling and tipping, people that i have spoken to have done both and say they have had great results either way. they have also said this paint goes a long way. i know its not the cheapest on the market but being able to buff it and make repais will be well worth it. I will let you know about the price tonight i hope.
__________________
1988 Grady White Seafarer Yamaha 250 ox66 on a bracket
|
|
#3
02-22-2013, 06:21 PM
|
|||
|
|||
|
Spoke with 2 more guys today that have used the paint, one of which claims that he has been using Signature finish for 20 years and swears by it and has done repairs with no problem's. He painted his current boat 7 years ago and is still looking good . So i am sold! Kamikazi, i just spoke to the owner again, he quoted me a price of 300.00 for the hull and top side paint. when i say top side i mean the gunnels and on top of the cabin. i dont know if this is more or less than the others but i cant imagine its that much more or less. please feel free to chime in, thanks
__________________
1988 Grady White Seafarer Yamaha 250 ox66 on a bracket Last edited by wellcraftv20step; 02-22-2013 at 06:30 PM.
|
|
#4
02-23-2013, 07:47 AM
|
|||
|
|||
|
Make sure you post pics of process you use and the results. I would be interested in seeing them!
Kamikaze
__________________
74 V20 CC with a 150 Johnson (Gone but not forgotten) 89 V20 Cutty with a Tower (Build in process)
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
