|
|
|
|
#1
|
||||
|
||||
2 words ...... duct tape!! LOL, just kidding....sorry I can't really answer your question either.
 Hopefully somebody can.
__________________
 1994 Wellcraft V21 
|
|
#2
09-04-2012, 03:23 PM
|
||||
|
||||
Quote:
BLACK duct tape....  Welcome to the site MuttonSnapper. We are all novices at one time or another. As to your question on removing the wires, although I cannot speak from direct experience on your particular engine, I can say that if your engine is like most of the engines I've worked on through the years they were all made to simply plug into a connector. Usually just 3 main wires.. One battery positive, One battery negative and a bundled cable that plugged into the engine's electrical system. Simple stuff really. About a 2 on a scale of 1 to 10. Some of the other guys on here have direct experience on your engine and I'm sure they will be happy to answer your question accurately.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless. Last edited by Destroyer; 09-04-2012 at 03:33 PM.
|
|
#3
09-04-2012, 04:09 PM
|
||||
|
||||
|
MuttonSnapper post some pics of the harness, rigging tube, boat, motor, speed numbers (
 ) etc. If you are running the SmartCraft its all fly by wire. Follow the wires where they come out the rigging tube, and mark, then unplug them. Disconnect the negative battery cable first. Maybe RidgeRunner will be able to help out, as he has a 250XS.
__________________
1983 V-20 capsized. . . . in the garage.
|
|
#4
09-04-2012, 05:30 PM
|
||||
|
||||
|
don't the shift and throttle cables go thru there too?
 That adds a little to the difficulty in that you need to make sure they are still adjusted right at the completion of the project. I'll have to defer to someone with a Merc on that...
__________________
1984 V20 "Express" & 2003 Suzuki DF140 (SOLD!) 2000 GradyWhite 265 Express YouTube/SkunkBoat https://www.youtube.com/channel/UC4F...znGospVOD6EJuw Transom Rebuild https://www.youtube.com/watch?v=EEz94NbKCh0 https://www.youtube.com/watch?v=Oe_ZmPOUCNc
|
|
#5
09-04-2012, 05:48 PM
|
||||
|
||||
|
Quote:
__________________
1983 V-20 capsized. . . . in the garage.
|
|
#6
09-04-2012, 06:55 PM
|
||||
|
||||
|
on my boat i bought a rigging sleeve, made from sunbrella cloth. it just zippers on! worked out great! the only thing is you have to make sure you clean it and lube the zipper so it will always work, or it will be junk when you have to remove it.
http://www.gandermountain.com/modper...ID=GSHOP_83058 
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
|
#7
09-04-2012, 06:56 PM
|
||||
|
||||
|
I would go with a split loom setup so you don't have to pull everything out. I have something like this on my McKee and it works great.
http://www.cabletiesandmore.com/RountIt2000.php It's easy to work with, UV resistant and looks nice and clean. -Svence
__________________
1984 V-20 Steplift 1998 Johnson 175
|
|
#8
09-05-2012, 10:18 AM
|
||||
|
||||
|
MJ that sunbrella rigging tube is brilliant. I did not know that even existed. Seems better than a hard flexible rigging tube because it wont mar the surace it sags on.
__________________
1983 V-20 capsized. . . . in the garage.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
