Va Beach v20 project

[spareparts]

Hey Kracker, if you're interested in that console, let em know. They may do something with that boat soon. I can probably get it as far as Raleigh for you if you want it

[RidgeRunner]

HD Brother..

[reelapeelin]

W/the splashwell in place, where does the water go that's gonna get into the boat?...sorry if I'm jumpin' ahead here>>>

[Kracker Jack]

Originally Posted by reelapeelin

W/the splashwell in place, where does the water go that's gonna get into the boat?...sorry if I'm jumpin' ahead here>>>

REEL to be honest with you Im kinda taking this part one step at a time. Im gonna build the splash box. and then temperally mount the motor and tanks and mock up average weight then splash it to see waterline and then figure it from there. Im now running into issues to were I cant trim my motor up If I build the false angled floor in the splash box. This part of the build is really becomeing a pain in the a$$!!!!!! I will figure it out step by step. This is the part you dont want to screw up on!!!!

[reelapeelin]

Originally Posted by Kracker Jack

REEL to be honest with you Im kinda taking this part one step at a time. Im gonna build the splash box. and then temperally mount the motor and tanks and mock up average weight then splash it to see waterline and then figure it from there. Im now running into issues to were I cant trim my motor up If I build the false angled floor in the splash box. This part of the build is really becomeing a pain in the a$$!!!!!! I will figure it out step by step. This is the part you dont want to screw up on!!!!

Why are you adding a splashwell at all?...w/the sump in place, all the water's gonna wind up there...I think yer gonna find after you mock-up the weight and splash, your floor deck will be below water-level, so scuppers won't work...I believe it's all gonna be the bilge...which all the pre-'78s are and there ain't nothin' wrong w/that...

[Kracker Jack]

Originally Posted by reelapeelin

Why are you adding a splashwell at all?...w/the sump in place, all the water's gonna wind up there...I think yer gonna find after you mock-up the weight and splash, your floor deck will be below water-level, so scuppers won't work...I believe it's all gonna be the bilge...which all the pre-'78s are and there ain't nothin' wrong w/that...

Im trying to consolidate most of the transom wash with the splash box. Weight yes! The box I made is heavy as $hit! I was thinking about putting 2 brass tubes thru the transom and put a ball scupper on the outside, I can then plug the inside when fishing and under anchor,and when I'm running I can pull the plugs and drain water and I can also pull plugs when its on the trailer for rain water purposes.the 2 drains would be deck level on either side of the splash box.

[reelapeelin]

Originally Posted by Kracker Jack

Im trying to consolidate most of the transom wash with the splash box. Weight yes! The box I made is heavy as $hit! I was thinking about putting 2 brass tubes thru the transom and put a ball scupper on the outside, I can then plug the inside when fishing and under anchor,and when I'm running I can pull the plugs and drain water and I can also pull plugs when its on the trailer for rain water purposes.the 2 drains would be deck level on either side of the splash box.

Like you said...you'll have to determine w/a mock-weight/splash test...hope it works out for you..lotta nice work there...

[RidgeRunner]

Heavy Duty. 1 and 1/2" thick splashwell walls before glassing. It would make a heck of a sturdy seat base, or a launch pad. All positives.

[Kracker Jack]

Originally Posted by RidgeRunner

HD Brother..

???? LOL!!! Whats HD mean?

[Kracker Jack]

Originally Posted by spareparts

Hey Kracker, if you're interested in that console, let em know. They may do something with that boat soon. I can probably get it as far as Raleigh for you if you want it

Spare I think im gonna have to pass on the console. I truelly have way to much going on right now to even be able to pick it up. I like the console alot and its unfortunate I cant get it. I will just work with the one I have. Thank you very much for your help. Were you the one who sent me the pictures? I responded back to the pictures.