floor layup schedule HELP

[Kracker Jack]

Originally Posted by kamikaze

Kracker:

I would glass the underside as well. Doesnt' need to be 1708, but it will add strength and protection against any mositure that may build over time

Kamiakze

I put one layer of 1.5 CSM on the bildge side of the sole and when I glued the ply down I caulked thickened resin on all edges so when I put the ply down it gushed out of the but joints and edges

[Richie Rich]

each layer of 1708 or 1808(0/90) is about 1/16 inch finished/rolled out....i would at least replace the same original thickness....depending on the core, probably a layer of each...45/45 and 0/90