|
|
|
|
#1
|
||||
|
||||
Unreal, you are moving at breakneck speed. Every bit looks great.
Have you any ideas on your gunnels/cap? I have an idea on a cap for the '74 I have sitting in the yard. Them were some pretty stringers.. LOL. Like buying gold jawelry and hitting it with a spray bomb. 
__________________
 1996 -19' NV Flats 115 Mercury 4-stroke 1983 -20' Wellcraft Center Console 250 XS Last edited by RidgeRunner; 01-30-2012 at 08:12 AM. Reason: "***elry" , Really?? Now that is ridiculous. 
|
|
#2
01-30-2012, 12:02 PM
|
||||
|
||||
|
Quote:
|
|
#3
01-30-2012, 01:11 PM
|
|||
|
|||
|
Kracker
I did a similar cap this past year on an old closed bow I converted to a center console to knock around on. I made the gunwale ribs out of a mold fashion from a 2X6 (rib front) and two (sides) 1/4" inch MDF panels screwed to the sides of the 2X6 that were cut to match the side wall of the hull. I went with three per side as well, but for a 16 ft boat is was probably overkill I then glassed a 2X4 on the top inside of the gunwale ribs side so that I could screw and glue plywood gunwale from the top as well as from the side walls of the hull . I used "2" urethane insulation on top and shaped it with the belt sander to soften the lines of the cap. One thing I didn’t do that I should off is build up a lip on the inner rail so that spray doesn’t' flow into the cockpit if it makes it to the gunwale. It would have been easy to do with the urethane had I thought about it. Glassed all with 1708 and couldn't be happier. It is lightweight and quite strong. I'm able to walk the rail and there is no give what so ever. Kamikaze
__________________
 74 V20 CC with a 150 Johnson (Gone but not forgotten) 89 V20 Cutty with a Tower (Build in process)
|
|
#4
01-30-2012, 06:39 PM
|
||||
|
||||
|
Im gonna incorporate a wash rail or lip on my cap also.
|
|
#6
02-03-2012, 05:48 PM
|
||||
|
||||
|
Feathered in my edges today and finished grinding gellcoat (what a pain in the @$$)!!!!!! I cut my cloth and will be glassing the floor tomorrow. I also am gonna add a little bonus to this boat, I started prepping some 1 1/2 x 4 inch teak. I glued it together with epoxy and clamps and Im gonna make a teak steering wheel base (pod style) and control base and compass base to all match my outrigger reciever base will also be teak. All the teak will be cleared to a gloss finish.
Last edited by Kracker Jack; 02-03-2012 at 06:03 PM.
|
|
#7
02-11-2012, 11:12 AM
|
||||
|
||||
|
Fuel tank
Im leaving and headed to Hertford, NC to get a heck of a deal on a fuel tank for the boat. A guy on craigslist is selling a 30 gallon above deck fuel cell brand new moeller tank for 60 bucks. I pretty stoked because this this is a great deal and the exact size to easily fit under my console.
|
|
#8
02-11-2012, 03:04 PM
|
||||
|
||||
|
just got back from Hertford, NC and this guy threw in another 18 gallon boat tank for free!!! so I got 2 tanks what a deal!!!
|
|
#9
02-12-2012, 09:05 AM
|
||||
|
||||
|
Quote:
That IS a great deal!!...maybe w/your glass skills, a small bench in front of the console could hold the 18 gal tank...hmmm Kracker, you're doing some AWESOME work on this V...you gonna have the whole package when done!!...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#10
02-12-2012, 11:13 AM
|
||||
|
||||
|
Quote:
igslist has been a great tool for finding things I need cheap for this boat. I also bought some Miami Lees outrigger base recievers the other day on craigslist for 20 bucks!!!! the guy had no idea what he had.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
