Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > General

Reply
 
Thread Tools Display Modes
  #1  
Unread 01-28-2012, 09:42 AM
spareparts's Avatar
spareparts spareparts is offline
God
 
Join Date: Oct 2006
Location: Raleigh, NC
Posts: 6,192
Default

on an 89 engine, the coolant reservoir should be part of the exhaust riser, the exhaust manifold should be made out of aluminum, while the exhaust riser/reservoir is cast iron. There were some early issues with the gasket leaking into #4 cylinder. It would be prudent to pull the spark plugs and do a compression test on the engine. Also look at the heat exchanger, it should be 4" in diameter, earlier ones were 3". Take a good look at the charging system, its built into the engine balancer, look at the windings behind the balancer to see if you can spot any corrosion. While you have your head down there, look for signs of antifreeze leaking from a small hole right at the base of the front timing cover, its a weep hole to allow coolant that has gone past the cam seals to leak out.
Reply With Quote
  #2  
Unread 01-29-2012, 08:55 PM
bradford's Avatar
bradford bradford is offline
God
 
Join Date: Nov 2006
Location: Wilmington Island, Georgia
Posts: 4,879
Thumbs up

That fella Spare can sure can save yo a$$.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD
1979 Marine Trader 44, twin Ford Lehman 120s
2006 Panga 14, Tohatsu 20
Reply With Quote
  #3  
Unread 02-02-2012, 01:10 PM
wellcraftv20step wellcraftv20step is offline
Senior Member
 
Join Date: Jun 2011
Location: long island's south shore n y
Posts: 580
Default 470

Spare i am familliar with the weep hole thanks, i will look closely for other probs, by the way i didnt like the inconsistancys in talking to the seller so i gave him the boot! i found another i am looking at this sunday in P a . it is a lake engine and comp is 125 across the board. What do you yhink of those numbers . you can take a look if you type in your search, craigslist Pa 3.7 mercruiser, its the 4 barrel .please let me know what you think he is going to run it for me on a pallet
Reply With Quote
  #4  
Unread 02-02-2012, 07:06 PM
spareparts's Avatar
spareparts spareparts is offline
God
 
Join Date: Oct 2006
Location: Raleigh, NC
Posts: 6,192
Default

post up a link, I couldn't find it, what city?
Reply With Quote
  #5  
Unread 02-02-2012, 09:32 PM
wellcraftv20step wellcraftv20step is offline
Senior Member
 
Join Date: Jun 2011
Location: long island's south shore n y
Posts: 580
Default 3.7 mercriuser

http://philadelphia.craigslist.org/boa/2801825407.html here you go spare.
Reply With Quote
  #6  
Unread 02-02-2012, 10:42 PM
spareparts's Avatar
spareparts spareparts is offline
God
 
Join Date: Oct 2006
Location: Raleigh, NC
Posts: 6,192
Default

looks pretty good, it appears to be what he said it is(correct heat exchanger, manifold, etc) notice it has the complete power steering assembly, if your 3.0 doesn't have power steering, it would be nice to add. First thing I'd is add a pertronix electronic conversion, see if you can find the tall flame arrestor as well
Reply With Quote
  #7  
Unread 02-03-2012, 07:11 AM
wellcraftv20step wellcraftv20step is offline
Senior Member
 
Join Date: Jun 2011
Location: long island's south shore n y
Posts: 580
Default 470

thanks again spare. i will let you know how it goes !
Reply With Quote
  #8  
Unread 02-04-2012, 12:08 PM
twhrider2 twhrider2 is offline
Senior Member
 
Join Date: Jul 2011
Location: Asheboro N.C.
Posts: 145
Default

The 4 barrel carb. and associated components are worth over half the asking price! Good looking engine, good luck.
Reply With Quote
  #9  
Unread 02-05-2012, 11:40 AM
aussie's Avatar
aussie aussie is offline
Senior Member
 
Join Date: Feb 2011
Location: rockbank australia
Posts: 562
Send a message via AIM to aussie Send a message via MSN to aussie Send a message via Skype™ to aussie
Default

if would be good to let us no the difference in power from the 3.0 to the 3.7 i have a 3.7 and wasnt to happy on the engine power and buy saying that i stepped out of 17 ft with a 115hp so it a big jump in size and wieght
Reply With Quote
  #10  
Unread 02-05-2012, 02:11 PM
wellcraftv20step wellcraftv20step is offline
Senior Member
 
Join Date: Jun 2011
Location: long island's south shore n y
Posts: 580
Default 470

well, i went to pennsylvania this morning to look ,at an run this motor. this thing ran perfect so i bought it. and the pictures did not do it justice. very clean.. happy day!. and aussie i do believe thier will be a significant difference. thanks for giving it the nod spare. i will put it in in march sometime.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:55 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.