![]() |
|
|
|
#1
|
||||
|
||||
|
don't know how to get from there to you, but I know a guy n Texas that has a complete 4.3 motor/transom/drive for sale(you probably get the boat to go with it) pretty cheap. The boat was running, but the floor and stringers are bad and he decided to sell the parts rather than repair
|
|
#2
|
|||
|
|||
|
thanks spare! i think i just found a 1989 470 Pa. lake engine where i am on long island, just sitting here getting up the nerve to pull the trigger on the deal. this guy did a swap for a 4.3 and thats how he came about this engine. what i like about this deal is that the guy i'm buying the motor from is going to install it for a winter price and says he can sell my 3.0 with no problem. just thinking aloud,
|
|
#3
|
||||
|
||||
|
you should replace the gear ratio in the drive when you do the swap(1.98 to 1.84), but that being said, you will probably be fine just swapping props, try a Mercury Mirage prop to hold all that torque, go up at least 2 numbers in pitch from what you are running now
|
|
#4
|
|||
|
|||
|
thanks spare. what prop should i use. i am runnig a 15.25 x 15 with the current 3.0 motor, thanks,
|
|
#5
|
||||
|
||||
|
17 mirage would be a good start
|
|
#6
|
|||
|
|||
|
thanks spare. i finally got up the nerve to pull the trigger on the deal for that 89 470 mercruiser from Pennsylvania. i am bringing my v to him on sunday. who knows with the weather we are having in new york i just mite be able to give her a try at the end of the week. very excited to see the difference in power from the 3.0 to the 470. spent a year putting this boat togeather and was very dissapointed in the power. cant wait. thanks again for the help,
|
|
#7
|
||||
|
||||
|
89 model should be a a 165 or 180 3.7L a 470 is an earlier model with the small heat exchanger and forward coolant reservoir. Do you have any pics?
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|