Pro-Pulse Props

[jasoncooperpcola]

I posted a thread on the local fishing forum, looking for a prop. Already got a call, a guy has a 14-1/2x17 OMC stainless prop and wants $100. Might get it after i get my trim motor.

I took my prop to Accu-Prop. Found out my 15-1/2x14 is way too big for my engine for what i am using it for. Also one blade is a 13 pitch and on top of that the previous shop i used for my prop repair put a 8-10 cup on it. The owner of Accu-prop said that 15 1/2 prop is primarily for 250s and maybe the v8 300. I guess when i originally bought the boat 4 years ago they stuck any prop they had on it.

[Destroyer]

Originally Posted by jasoncooperpcola

I posted a thread on the local fishing forum, looking for a prop. Already got a call, a guy has a 14-1/2x17 OMC stainless prop and wants $100. Might get it after i get my trim motor.

I took my prop to Accu-Prop. Found out my 15-1/2x14 is way too big for my engine for what i am using it for. Also one blade is a 13 pitch and on top of that the previous shop i used for my prop repair put a 8-10 cup on it. The owner of Accu-prop said that 15 1/2 prop is primarily for 250s and maybe the v8 300. I guess when i originally bought the boat 4 years ago they stuck any prop they had on it.

The cupping is fine... it probably helped you. You will probably find it on your new prop. I'm guessing that the dia should be in the 14 1/2 range with a 15 or 17 pitch and about a 15 deg rake. Can't get my mind around that one blade being a 13 pitch... somone should be fired for that...