Trim Tab install

[macojoe]

OK more pic



I decided to put the switches straight up and down, to keep water out of them





The Pump, its mounted at least a foot off the floor to keep it dry.





The Thur hull nipples, they come 3" in the kit, but I had to get 6" as the transom is 5" thick



Note the huge scuppers!!



That wood you see in the 2nd pic is were the hose came for the salt water wash down.
The hole was drilled on a angle and believe it or not it starts right in the middle of the nipple for the tabs.
The wood was hammered in with 5200 on it, recessed 1 inch, and then toped off with Marine Tex on the out side.

Here is the next project that I will have done this week, I have to get a 2nd battery and two battery boxes.



Tabs down *;)