|
|
|
|
#1
|
|||
|
|||
Well I used a big screw driver in the flywheel against the block 120ftlb
started it worked great. Does anyone know why mercury used 40amp stator? and why they used 2 20amp stators together each one to 2 different voltage regulators? is it so if ones side dies the motor can still run? one of my old volt reg had a wires melted pretty bad and there was a big black burn spot on the circuit board under the epoxy, but the boat still ran and charged the battery. 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
