EVINRUDE engine tuner

[THEFERMANATOR]

I don't mind payin the shipping so lonag as it's not sky high. I don't need it in a hurry or anything either, but this is the only cleaner I've found that doesn't harm plastic. Here recently I've had a run on bad fuel injectors and I use this stuff for cleaning them on the bench(I'm one of them wierd cheap guys that services injectors in my shop).

[reelapeelin]

Originally Posted by THEFERMANATOR

I don't mind payin the shipping so lonag as it's not sky high. I don't need it in a hurry or anything either, but this is the only cleaner I've found that doesn't harm plastic. Here recently I've had a run on bad fuel injectors and I use this stuff for cleaning them on the bench(I'm one of them wierd cheap guys that services injectors in my shop).

Ya might wanna check on the cost of shippin' a gallon of volatile liquid and make sure it passes the "not sky high" test...ain't tryin' to trip you up or anything, but the devil's in the detail ya know and shippin fees are gonna run a gal of that stuff up pretty good I expect...

[spareparts]

Hey ferm, have you tried an ultrasonic? I started with this one from harbor freight http://www.harborfreight.com/25-lite...ner-95563.html Once i figured out how well it works I bought one of these http://www.***elsmall.com/ulcaclsysh.html. I still use the Yamaha cleaner when I get some green parts. But by using the ultrasonice, I've only been thru 2 qts of Yamaha in hte past year. I just add a little purple power to teh water. My wife likes it because the house doesn't smell like carb cleaner. as far as injcetors go, there are several local shops that clean them in house using an ultarsonic. But htey don't have the tools to measure flow. They check pattern, but thats about it. Thats why i use injectorrx. they clean them, put new screens inthem, and flow test each one, They give you a nice chart showing the flow before and after that i give a copy of to my customers. That way they can see it was an issue. My thinking is on a marine efi system , it won't know if its a lttle lean unitll you burn a piston.

[THEFERMANATOR]

Well I called up an EVINRUDE dealer that I know does alot of service work and low and behold he has some of it still in stock. He said it's no longer listed in teh catalog, but it has superceded to a new number and is still available to dealers. The price has even gone down on it to under $60 for agallon(last gallon cost me almost $80 6 years ago).

[Destroyer]

Originally Posted by THEFERMANATOR

Well I called up an EVINRUDE dealer that I know does alot of service work and low and behold he has some of it still in stock. He said it's no longer listed in teh catalog, but it has superceded to a new number and is still available to dealers. The price has even gone down on it to under $60 for agallon(last gallon cost me almost $80 6 years ago).

That's great news Ferm.. glad to hear it. By any chance did he happen to mention what the new number is? Is it still called the same thing? I'd like to pick some up for myself and it would be good if I knew what to call it when I go to the marina.

[Destroyer]

Originally Posted by spareparts

Hey ferm, have you tried an ultrasonic? I started with this one from harbor freight http://www.harborfreight.com/25-lite...ner-95563.html Once i figured out how well it works I bought one of these http://www.***elsmall.com/ulcaclsysh.html. I still use the Yamaha cleaner when I get some green parts. But by using the ultrasonice, I've only been thru 2 qts of Yamaha in hte past year. I just add a little purple power to teh water. My wife likes it because the house doesn't smell like carb cleaner. as far as injcetors go, there are several local shops that clean them in house using an ultarsonic. But htey don't have the tools to measure flow. They check pattern, but thats about it. Thats why i use injectorrx. they clean them, put new screens inthem, and flow test each one, They give you a nice chart showing the flow before and after that i give a copy of to my customers. That way they can see it was an issue. My thinking is on a marine efi system , it won't know if its a lttle lean unitll you burn a piston.

Hey Spare, what is that second link please? Evidently the auto-censor thing blocked out some of the word. All I see is ***elsmall.com. Thanks!!

[THEFERMANATOR]

Supplement j e w in place of teh 3 * and it will come up. I'll have the part number shortly for it as I plan on going down this week and picking up at least another gallon as this stuff just WORKS.

[spareparts]

Ferm had it right, its j e w e l s mall

[Destroyer]

Originally Posted by THEFERMANATOR

Supplement j e w in place of teh 3 * and it will come up. I'll have the part number shortly for it as I plan on going down this week and picking up at least another gallon as this stuff just WORKS.

LOL, I tried A ss, shi, fuk, pretty much anything else you could think of.. Forgot that the site hates J ew.. (Must have been a J ewish programmer that wrote the code..lol) In all cases thank you both for the info...

[spareparts]

those things work grat, I clean all kinds of stuff in mine. Teh first thing i cleaned was my wifes wedding ring, looks brand new. I've cleaned my guns, fishig reel parts, tools, all kinds of crap. Best thing is the solution isn't harsh, just make sure you oil any bare metal parts afterwards to prevent rusting(per Willys advise)