|
|
#4
09-27-2007, 01:41 AM
|
||||
|
||||
Re: hyd steering.
you can use refrig copper tubing as it is for 600 psi and run it from pump to the back and put fittings there and thread on short flex hoses there. usually cheaper alot of boat mfg use copper as lines to the transom then go flex with 3 or 4 ft hoses
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode