![]() |
|
|
|
#1
|
||||
|
||||
|
thanks man. I do believe this site is going to be extremely helpfull to me!
On the stingers and transom, what would your best judgment on how to check these to issues out? When i was buying the boat I was jumping up and down all over the boat looking for soft spots. found none and i weigh 230lbs. there is 1 round screw out port near the transom. looked in there (everything looks alright) now the transom looks alright! how do i check to see if its rotted? or bad |
|
#2
|
||||
|
||||
|
Welcome to the site....It will take time but sooner or later if you keep at it you'll find the parts that you need. Did the early 70's boats have a door on them? cant remember every seeing one with a door on it.
__________________
1986 V-20 1986 Yamaha 150 HP |
|
#3
|
|||
|
|||
|
My 77 didn't come with a door, but my neighbor has a 76 with a door. I don't know if it was added on later or what.
__________________
77 V20 cuddy with 170 I/O Mercruiser 72 16ft. Carolina w/a 25hp Evinrude |
|
#4
|
||||
|
||||
|
why has the transom been cut lower on one side of the motor? may have transom issues there.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#5
|
||||
|
||||
|
Just found this thread.
Skools, I'll bet that was a type of modification just for ease of the steering. I don't ever remember a cuddy door being on the one I have, just a canvas cover. Did this to keep vagrants out. http://www.wellcraftv20.com/communit...kitty+excluder And the hatch cover is gonna be a booger to find.
__________________
'75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny |
|
#6
|
|||
|
|||
|
My '74 was just fitted for a canvas cover over the entry. My hatch cover is OK but they were just fiberglass without much reinforcement so I wouldn't expect there to be too many good spares around.
|
|
#7
|
||||
|
||||
|
there's a thread right below this where someone (mulv80 I think?) has a 79 sliding hatch cover to sell.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|