|
|
|
|
#1
|
||||
|
||||
Flounder Pounder seems to be giving some of the best deals.
Go to fpmarine.com click on plastics and scroll down. Several options.
__________________
Heavily medicated for your protection. 
|
|
#2
05-04-2010, 08:07 AM
|
||||
|
||||
|
That teak looks great!
I need to do mine . . .
|
|
#3
05-09-2010, 11:49 AM
|
||||
|
||||
|
Scuppers
Just about done. had to get a bit creative. I left the old scupper rings (removed, sealed, re-attached actually) in place to act as spacers since the thru-hulls stick about 1/4 inch out of the transom. Then I mounted the new scuppers over them. Here's the old scupper ring all filled in with 3M 4000:
|
|
#4
05-09-2010, 12:19 PM
|
||||
|
||||
|
Teak looks fantastic!! Nicely done. Sounds like you're on top of the scupper problem.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|
|
#5
05-09-2010, 12:35 PM
|
||||
|
||||
|
Quote:
|
|
#6
05-09-2010, 02:51 PM
|
||||
|
||||
|
Teak DOES look great!!...nice job!!...
On that hole in the back of the rod-box...have you considered facing the rod-box itself from the rod-holder back...attach to the front edge of the rod-holder and add cleats around the inside lip of the rod-box to attach to...could be done w/Starboard or more teak...filling in that hole as is, is gonna be a tough one...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#7
05-09-2010, 05:22 PM
|
|||
|
|||
|
really thats an easy fix.remove it,clean & rough up the plastic from the back.cut wax paper bigger than the hole.wet the paper with resin & cover it with fiberglass cloth,lay it over the hole from the back & tape the edges in place.let it cure.remove the paper & now cut cloth to fit in the hole from the front,rough up the resin & wet it out & lay the cloth in & keep building till you reach the level of the plastic.sand & paint the boxes.done.I did a lot of repairs on mine.lots of fiberglass how to on youtube.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
