|
|
|
|
#1
|
|||
|
|||
You wouldn't have to have your V, all V's are basically the same, maybe you can find one nearby to measure or compare? I'm afraid I'm much closer to your boat than you so I'm no help.
Any volunteers?? Doug
__________________
Doug 87 Cuddy with a 94 Black Max 200! & a 1983 Cuddy, looking for power. 
|
|
#2
04-08-2010, 07:54 PM
|
|||
|
|||
|
PS, a ranger is a MUCH lighter boat, make sure the axle, springs & frame can take the load. our V20's are heavy old school beasts.
Doug
__________________
Doug 87 Cuddy with a 94 Black Max 200! & a 1983 Cuddy, looking for power.
|
|
#4
04-09-2010, 08:31 AM
|
|||
|
|||
|
Trailer bunker measurements
PHATDADDY, Thanks for the comeback. A few measurements would sure help. I plan on using the adjustable bolster brackets, as shown in Overtons cat., and once I transfer the boat, I can jack it up and make final adj.
|
|
#5
04-09-2010, 07:11 PM
|
||||
|
||||
  the bunks are 50" apart and 11.5" above the horizonal frame member in the pic the bunks are 2x10 rough cut cypress with a bevel at the top if you need something else,let me know Last edited by phatdaddy; 04-09-2010 at 09:30 PM.
|
|
#7
04-13-2010, 06:44 AM
|
||||
|
||||
|
Another consideration...most Rangers come on painted trailers...not gonna last long in FL...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
