Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)
-   -   That'll Work (https://forums.wmpdevserver1.com/community/showthread.php?t=13786)

billbdavis 04-08-2010 12:45 PM

convert trailer for step v
 
I hava a 79 step v 20', with a rusted out trailer. I got a deal on another trailer that had a 20' Ranger on it at one time. My boat is kept in Destin, Fl and I live in Memphis, Tn. My problem is that I need some kind of specs to convert the trailer for a deep V hull. I plan on raising the bunks and getting them somewhat close and then adjust it when I get to Fl. Any suggustions or help would be appreciated

Bonita Dan 04-08-2010 02:24 PM

Not much can be done till ya get the trailer close to the boat and take some measurements. Bring a floor jack,wood,tools,tape measure and your credit card. The Ships Chandeleur in Destin and Auer Marine in Ft.Walton have trailer parts in case ya need to add some brackets and such. Hope it works out for ya.

Blue_Runner 04-08-2010 02:45 PM

I'm afraid Dan is right. Take measurements of your rusted out trailer bunk locations, distance from winch to end of bunks, dist. b/t bunks, height of winch, etc. and try to set up the other trailer the same, or at least close. Of course this assumes the boat fit well on the rusty trailer.....

garbubba 04-08-2010 07:52 PM

You wouldn't have to have your V, all V's are basically the same, maybe you can find one nearby to measure or compare? I'm afraid I'm much closer to your boat than you so I'm no help.

Any volunteers??

Doug

garbubba 04-08-2010 07:54 PM

PS, a ranger is a MUCH lighter boat, make sure the axle, springs & frame can take the load. our V20's are heavy old school beasts.

Doug

phatdaddy 04-08-2010 10:11 PM

bill, i've got an 83 on a bunk style aluminum trailer, i could take some measurements of the bunk height ,length, & width, kinda get you in the ball park. let me know if it would help

billbdavis 04-09-2010 08:31 AM

Trailer bunker measurements
 
PHATDADDY, Thanks for the comeback. A few measurements would sure help. I plan on using the adjustable bolster brackets, as shown in Overtons cat., and once I transfer the boat, I can jack it up and make final adj.

phatdaddy 04-09-2010 07:11 PM

http://i377.photobucket.com/albums/o...6/DSCF0488.jpg

http://i377.photobucket.com/albums/o...6/DSCF0489.jpg

the bunks are 50" apart and 11.5" above the horizonal frame member in the pic
the bunks are 2x10 rough cut cypress with a bevel at the top
if you need something else,let me know

phatdaddy 04-10-2010 07:53 PM

here's a few more i took today

http://i377.photobucket.com/albums/o...6/DSCF0490.jpg

http://i377.photobucket.com/albums/o...6/DSCF0493.jpg

http://i377.photobucket.com/albums/o...6/DSCF0491.jpg

http://i377.photobucket.com/albums/o...6/DSCF0492.jpg

reelapeelin 04-13-2010 06:44 AM

Another consideration...most Rangers come on painted trailers...not gonna last long in FL...


All times are GMT -5. The time now is 05:49 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.