non skid coating???

[nymack66]

Richie,
I shot my deck with Gelcoat and air brush it with glass beads, its not agressive on ones bare feet at all, and very much non skid. I am sure you can use it with whatever paint you go with also, Shoot me a PM if you like and I can mail you some for a test on a piece of wood.

[reelapeelin]

That looks GREAT, NYMACK!!...LOOKS LIKE JUST THE RIGHT AMOUNT OF TEXTURE...

[redfordguy]

i redecked my 74 and after the glass i covered it with a bed liner product called grizzly grip. It can be found online. I used white. it is very wear / stain resistant and washable. i love it. the product i bought was of the aliphatic type. hope this helps

[phatdaddy]

rfg, i took a look at the grizzly grip and like the fact that you can vary the grip. did you have to use the primer on glass?

[redfordguy]

I did not have to use any primer. my rebuild was fresh so i wiped the fresh resin with xylol then a quick sand with 100 grit. the sanding is not nessacary but it wont hurt for an extra 20 min work. I have 2 seasons on it now with no regrets. no stains no yellowing and very washable even blood as i fish my boat. And the texture is easy on the feet no shoes required. Also it was very easy to apply i just masked my area rolled it on and removed the masking while it was wet. I think it is a great product for boat use

[reelapeelin]

Originally Posted by redfordguy

i redecked my 74 and after the glass i covered it with a bed liner product called grizzly grip. It can be found online. I used white. it is very wear / stain resistant and washable. i love it. the product i bought was of the aliphatic type. hope this helps

Thanks for posting!!...I'm in the process of looking for something and this might be it...