|
|
#51
|
||||
|
||||
Yes those marks are a reflection. You had me worried for a minute but if you look close you will see a redish line down the middle, that is the reflection from my engine hoist.
I have more invested in the tools than I would like to confess to but I wanted to make sure it went together right. Yes she is running, I have a short video of her first time. I did not have an hour meter before so I installed one before I fired it up for the first time. I now have 1.3 hours on it but they are all on the muffs or in a tub. I need to put it in the water to set the idle while in forward gear. I have rebuilt auto engines before but never a outboard let alone a 2 stroke. All and all I am happy with the way it has turned out so far. I'll try to keep you posted as the break in process. Durwood
__________________
1984 V-20 Center Console 1985 90 hp Merc. American by birth, Southern by the grace of GOD. Never let your hobby become a job but rather let you job become your hobby. http://www.wellcraftv20.com/gallery/turbine_doc_84_cc 
|
|
#52
03-19-2010, 01:18 PM
|
||||
|
||||
|
don't forget to run double oil during first 25 hours for break in to prevent ring damage.
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#53
03-21-2010, 08:01 PM
|
||||
|
||||
|
30 gallons of 25:1, gottcha covered, even installed an above deck tank to keep from having to double the 60 gallons in my inboard tank.
__________________
1984 V-20 Center Console 1985 90 hp Merc. American by birth, Southern by the grace of GOD. Never let your hobby become a job but rather let you job become your hobby. http://www.wellcraftv20.com/gallery/turbine_doc_84_cc
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
