![]() |
|
|
|
#1
|
||||
|
||||
|
Replace what you take out with new, if using expandable be careful it does not overflow.
That foam is vital to keeping your hull afloat in a swamping or overturn. The few seconds or minutes it keeps your hull afloat could make or break you getting out from under or keep you afloat long enough to organize and recover.
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#2
|
||||
|
||||
|
You'd be surprised just how little that (the correct) foam does absorb, the average boat may be around 5 gallons.
The wrong foam will be as bad as a sponge. Can't remember which was which. The usual problem is water trapped between the foam and it's way to drain.
__________________
'75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny |
|
#3
|
||||
|
||||
|
Quote:
Open-Cell foam IS like a sponge...millions of tiny air-pockets soak up and hold water...on the other hand... Closed-Cell foam has no air-pockets and is more resistant to soaking up water...but water, over time will eventually find its way thru about anything...including gel-coat and into the tiniest of places in Closed Cell...it's just a matter of exposure to water over time...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#4
|
|||
|
|||
|
My 91 V cuddy got filled with water a couple winters back when the drain hold got plugged up with debris. I am guessing that the foam is under there completely soaked. Is there any way to dry it out short of pulling up the floor and removing the foam?
|
|
#5
|
||||
|
||||
|
I've heard of people drilling holes in the hull and letting the water drip out although that techniqe makes me cringe. I suppose it beats the alternative - rotten stringers & floor.
__________________
1994 Wellcraft V21 |
|
#6
|
||||
|
||||
|
Once it gets saturated it is impossible to get all of it out.
On one project, the boat was filled with leaves and water for a little less than a year, drained it cleaned it up, drilled/cut access holes and backed it into the garage for several weeks to help dry out. After the initial draining we got less than 5 gallons from it over a 3 to 4 week period and then it was down to a few drops here and there. To our amazement, the boat still weighed about the same. Know a guy with a Whaler type hull that hoisted it up in the tree by the bow eye for near a year, strange site seeing a boat dangling as if hung by the neck till dead, he said there was no appreciable difference in the weight, even letting it drain that long. And definitely not debunking reel, he is correct!
__________________
'75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny |
|
#7
|
|||
|
|||
|
Nice thing about the foam is when your stringers rot the foam keeps them in place.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|